Installing The Propeller Shaft
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Check that the mating surfaces of the propeller shaft and flange are clean. Install the propeller shaft using the marking made earlier. Use new screws. Tighten the screws. See: Summary of specific components and tightening torques .