Installing Components On The Turbocharger (TC)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Turbocharger, Oil Pressure Pipe And The Oil Return Line

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install:

the oil pressure pipe in the cylinder block with the pipe screw. Use new gaskets. Do not tighten
the oil return line in the cylinder block with a new sealing ring
the 2 x screws for the oil return line in the turbocharger (TC). Use a new gasket. Tighten
the lower and upper coolant pipe and pipe screws. Tighten. See: Summary of specific components and tightening torques
the clamp between the oil pressure pipe and the return pipe. Tighten.