Removing The Propeller Shaft

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Matchmark On Propeller Shaft CV Joint And Special Tool 999 7057

Courtesy of VOLVO CARS OF NORTH AMERICA.

Mark the propeller shaft CV joint in relation to the bevel gear flange.

Remove the screws for the propeller shaft. Use: 9997057 . Press the shaft's joints together as much as possible. Disconnect the shaft from the bevel gear. Allow the shaft end to rest against the stabilizer bar.