Removing Bevel Gear

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Angle Gear Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

NOTE:

To prevent oil leakage, position the bevel gear with the bleed hole upward.

Remove the screws, 5 pcs, for the bevel gear. Pull the bevel gear straight out. Then turn it during removal.