Replacing Intake Pipe And Gasket: Finishing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Engine Compartment Components

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install

the fuel distribution pipe.
Press together the quick-coupling. Use new screws . Tighten with 10 Nm .
connectors for the injector valves and the cover plate.
the vacuum hoses according to the earlier markings
plastic charge-air pipe.
connectors for sensors in the plastic charge-air pipe.
connectors for the throttle body.
air baffle from the control module box at the electric cooling fan shroud.
the dip stick in the intake manifold.