Replacing The Throttle Body (Electronic Throttle Module): Installation: Finishing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Install:

the pipe between the charge air cooler (CAC) and the throttle
the boost pressure sensor connectors and the charge air temperature sensor from the pipe between the charge air cooler and the throttle body (TB)
the hoses to the bypass valve
the hose between the charge air cooler (CAC) and the turbocharger (TC)
the intake manifold between the front cover plate and the air cleaner (ACL) housing.

Reconnect the battery negative lead. First read Battery, disconnecting .

NOTE:

After replacing the throttle unit, the throttle unit must be adapted using the vehicle communication input: "Adaptation of the electronic throttle unit". Remedy as necessary.