LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (Intake And Exhaust System - Removal, Replacement And Installation) >> Intake And Exhaust Manifold (B6294S2; 2002-2006) >> Intake Pipe/Gasket, Replacement >> Preparation >> Removing The Fuel Rail

Removing The Fuel Rail

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Fuel Rail Screws
GLL117891Courtesy of VOLVO CARS OF NORTH AMERICA.

Separate the quick-release fuel line connector. See Fuel line, lock .

Use tool 9512666 .

Remove: 

Spray universal oil or similar around the injector terminals on the intake manifold.

Gently work the fuel rail and injectors loose.

Put the fuel rail to one side.

NOTE:

Handle the injector valves carefully to avoid damaging the injector valves' nozzles with needles.