Intake Pipe/Gasket, Replacement: Finishing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Throttle Unit, Connector, And Hoses

Courtesy of VOLVO CARS OF NORTH AMERICA.

When replacing the intake manifold:

Connect the connector for the electronic throttle module.

Install:

the vacuum hoses according to the earlier markings
the screw securing the mounting for the dip stick pipe to the intake manifold
the inlet hose between the air cleaner (ACL) housing and throttle body (TB).

Test drive the engine.