Removing Heated Oxygen Sensors (HO2S)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Heated Oxygen Sensors

Courtesy of VOLVO CARS OF NORTH AMERICA.

Disconnect the connectors for the heated oxygen sensors (HO2S).

Remove:

the tie strap for the servo hose on the torque rod
the torque rod
the preheating hose.

Disconnect the wiring for the heated oxygen sensors (HO2S) from the clips and clamp.

Remove the heated oxygen sensors (HO2S).