Installing The Manifold: Finishing
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Install:
- the wiring for the heated oxygen sensors (HO2S) using the clip and the clamp
- the preheating hose
- torque rod.
Install the servo hose on the torque rod using a tie strap.
Test drive the engine.
Check for leakage.