LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (Intake And Exhaust System - Removal, Replacement And Installation) >> Intake And Exhaust Manifold (B6284T; 1999-2001) >> Intake Manifold/Gasket, Replacing >> Removing The Intake Manifold/Gasket >> Installing The Intake Manifold/Gasket

Installing The Intake Manifold/Gasket

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Intake Manifold Gasket
GLL108811Courtesy of VOLVO CARS OF NORTH AMERICA.

Make sure that the gasket faces are thoroughly clean.

Install a new gasket  with the three center screws in the lower row.

Lower the intake manifold over the three screws.

Install the remaining screws.

NOTE:

Make sure that the holes of the fuel rail are secured with the screws of the lower row and that the hose from the oil trap goes through the intake manifold at cylinders 3 and 4.

Tighten all screws to 20 Nm  .

scientia non olet · About LEMON Manuals