Intake Pipe/Gasket, Replacement: Installation: Finishing
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Install
- the fuel rail. Press together the quick-release connector. Use new screws , see also: Fuel line, lock
- injector connectors
- the protective cover over the fuel rail
- the vacuum hoses according to the earlier markings
- the plastic charge air pipe between the throttle body (TB) and the charge air cooler (CAC)
- the connectors to the throttle body (TB)
- the dip stick in the intake manifold.