Removing The Upper Inlet Pipe

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing The Upper Inlet Pipe

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the ten screws at the inlet pipe's parting surface.

Lift off the upper part of the inlet pipe. Install guards 9995723 .

Remove the connectors for the injection valves.

Remove the screws that hold the fuel rail.

Spray with universal oil or similar around the injectors' connection on the inlet pipe.

Wiggle and carefully pull loose the inlet pipe and injectors.

Part the quick-coupling for the fuel line. Use tool 9512666 .

NOTE:

Handle the injectors carefully to avoid damaging the injectors' fuel nozzle with needle.