Installing The Lower Inlet Pipe
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Install guards 9995723 .
Lower the inlet over the three screws.
Install the remaining screws.
Tighten all the screws with 20 Nm .
Install both vacuum hoses according to earlier marking.
Install
- the fuel rail with new screws . Tighten with 10 Nm
- the fuel lines quick-couplingNOTE:
Check that the coupling is installed correctly.
- The connectors for the injectors.