Intake Manifold/Gasket, Replacing: Finishing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing The Upper Inlet Pipe

Courtesy of VOLVO CARS OF NORTH AMERICA.

Plug in the connector for the electronic throttle module (ETM).

Install

the hoses for crankcase ventilation, EVAP-valve and brake booster
the screw for the dipstick tube's bracket against the intake manifold
the intake manifold between the air filter housing and throttle module
the battery's minus cable.
First read: Battery, disconnecting .

Test drive the engine.