Installing Components

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Intake And Charge Air Pipes, Turbocharger And Upper Heated Oxygen Sensors

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install:

the upper heated oxygen sensors (HO2S). See: Tightening torque
the heat deflector plates
the intake and charge air pipes from the turbocharger (TC)
the plastic intake pipe
the plastic charge air pipe
the engine stabilizer brace between the suspension turrets.

Connect the connector for the front heated oxygen sensors (HO2S) and clamp the wiring.