Installing Control Modules

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Engine Control Module

Courtesy of VOLVO CARS OF NORTH AMERICA.

CAUTION:

Check that no pins or sockets are damaged on the connector.

Install the surround for the control module box.

Carefully press the control module down into the grooves on the inside of the control module box. Press to the limit position

Insert tool 9995722 around the control module.

Move the upper section of the tool forwards as far as it will go. Pull up the tool.

Press the cover into place over the control modules. Check that the air ducts are correctly positioned.