Thermostat / Temperature Sensor, Engine Coolant, Replacing: Installation: Finishing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Power Steering Pump Screws, Auxiliaries Belt And Upper Camshaft Cover

Courtesy of VOLVO CARS OF NORTH AMERICA.

NOTE:

Ensure that the auxiliaries belt is correctly positioned on all the pulleys.

Install:

the power steering pump. Tighten the 3 x screws
the auxiliaries belt. Use 9997109
the upper camshaft cover.

Remove the hose clip. Refill with coolant. Use filling equipment 9512957 and cover 9512953 . Install the cap on the expansion tank.

Test drive the engine until the thermostat has opened. Check for leakage. Top-up the coolant.