Coolant Pump, Replacing: Reinstall
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Reinstall the removed components:
- the upper timing belt cover
- the front timing belt cover.
Tighten to 12 Nm
- install the auxiliaries belt
- reinstall the servo reservoir and the expansion tank.
Ensure that the hoses are correctly positioned
- the engine stabilizer brace. Tighten the screws at the suspension turrets. Tighten to 50 Nm . Tighten the screw for the engine bracket. Tighten to 80 Nm
- the cover in the fender liner
- the wheel. See Installing wheels .
Fill the cooling system with Volvo original coolant.
Wipe clean and check the engine compartment.