Transferring Components: Finishing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Wiring Located In Groove In Rubber Gaskets Around Hole In Floor

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install:

the 2-3 connectors on the right side and the 2 connectors on the left side
the cover over the level sensors. Check that the wiring is correctly located in the groove in the rubber gaskets around the hole in the floor
insulation panel
the backrest.