LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Intake And Exhaust System - Cleaning, Inspection And Adjustment) >> Crankcase Ventilation And Electronic Throttle Module (ETM) (B6284T; 1999-2001) >> Crankcase Ventilation And Electronic Throttle Module (ETM), Cleaning >> Installing >> Installing The Throttle Body

Installing The Throttle Body

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Throttle Body And Screws
GLL153610Courtesy of VOLVO CARS OF NORTH AMERICA.

Install: 

Raise the car.

Remove the splashguard under the engine.

Tighten the 4 x screws for the throttle body.

Lower the car.