Crankcase Ventilation, Cleaning 6-Cyl Non-Turbo: Cleaning

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Locating Hole In Intake Pipe

Courtesy of VOLVO CARS OF NORTH AMERICA.

Disconnect the hose with the T nipple from the intake pipe.

Remove 9995723

Clean the hole in the intake pipe using a Ø 2 mm drill bit.

Remove the hose from the T nipple.

Clean the T nipple. Use a Ø 2 mm drill bit.

Clean the hose using a Ø 2 mm cable and blow clean using compressed air

Clean the inlet pipe air duct.

Install:

the hose on the T nipple
the hose with the T nipple to the intake pipe.
cover 9995723