Installing ignition coil
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Install a new coil.
Align the coil and press down. Install the screw. Tighten to 10 Nm (7.4 lb. ft) .
Press in the connector until a clicking sound is heard.
Install the ignition coil cover.
Install upper camshaft belt cover.
Applies only to B6xx4T
Remove the seals.
Install the plastic hoses between the turbocharger (TC)/charge air cooler and the air cleaner (ACL)/turbocharger (TC).