Installing ignition coils

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Ignition Coil, Connector, And Screw

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the new coil.

Align the coil and press it down. Install the screw. Tighten to 10 Nm .

Press in the connector until a clicking sound is heard.

Install the cover over the ignition coil.

Install the upper timing belt cover.

Remove the seals from the charge air pipe. Reinstall the charge air pipe over the engine.