Installing the front seat belt (inertia) reels
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Install:
- the seat belt (inertia) reel with the seat belt tensioner by pushing it down through the clip into the fixture
- screws (x 2). Tighten to 48 Nm
- the connector. See Igniter wire connector
- seat belt buckle end mounting.
- the B-post panel according to Panel, B-post, replacing
- Check the seat belt function. See.