Installing rear seat belt (inertia) reels

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Rear Seat Belts

Courtesy of VOLVO CARS OF NORTH AMERICA.

NOTE:

Ensure that the guide for the end mounting is correctly positioned during installation. (The end mounting must be pointing forwards at an angle of 45°).

Install:

the screw for the end mounting. Tighten to 48 Nm
the seat belt (inertia) reel nuts. Tighten to 48 Nm
the connector. See Igniter wire connector
the parcel shelf.
the rear seat cushion. See Rear seat assembly
the seat belt in the seat belt guide
Then check the seat belt function. See.