Removing driver's airbag (SRS)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Slackening Off Screws From Back Of Steering Wheel

Courtesy of VOLVO CARS OF NORTH AMERICA.

Turn the steering wheel so that there is enough space for tools.

Slacken off the two screws positioned at 45 degrees on the reverse of the steering wheel.

Pull out the airbag to access the connectors.

Fig 2: Identifying Steering Wheel SRS Module

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove:

the SRS ignition cable connector. See: Igniter wire connector
the 2 connectors (there may be more or fewer).

Remove the airbag.

Transfer the keypads/ covers. See: Keypad unit, steering wheel, replacing .