Installing power seat

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Lift the seat into the car.

Install:

the four screws. Tighten to 48 Nm
the side piece from the rear mounting for the seat
the side piece from the front mounting for the seat
the multi-connector. See Installing the connector .

NOTE:

No extra grounding is required when reinstalling the seat.