Installing bracket and crossmember

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Install:

the bracket and cross member
wiring
one screw for the seat heater control module
a tie strap
the control module. See Installing the control module
the multi-connector. See Installing the connector
the seat. See Removing power seats, tilting .

NOTE:

Check that the wiring is correctly installed. Otherwise there is a risk of damage to the wiring.