Installing clothes holder head restraints

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying New Retaining Clip

Courtesy of VOLVO CARS OF NORTH AMERICA.

Insert a new retaining clip.

NOTE:

Ensure that the clips are correctly located. See the illustration.

Install:

the sheer fabric
upholstery

HINT: Heat up the upholstery slightly before installation to make it more elastic.

Ensure that the hole in the upholstery is directly opposite the hole in the clothes holder.

Fig 2: Identifying Zip Fastener

Courtesy of VOLVO CARS OF NORTH AMERICA.

Use a zip fastener catch to close the zip fastener.

NOTE:

Ensure that all seams are correctly positioned and the padding is not kinked under the upholstery.

Fig 3: Identifying Zip Fastener Stapled Together At Both Ends

Courtesy of VOLVO CARS OF NORTH AMERICA.

Staple the zip fastener together at both ends.

Fig 4: Identifying Clothes Holder Installation With Hammer

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install and press the clothes holder into place.

HINT: Tap it gently using a hammer to ensure it is properly secured.

Install the head restraint. Press the head restraint down until the catches engage.

NOTE:

Lift in the head restraint. Check that it cannot be moved upwards.