Installing the upholstery on folding head restraints

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

For tightening torques, see Tightening torque .

Fig 1: Identifying Head Restraint Installation

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the upholstery.

Install:

the Velcro strips
the Velcro seam
the connector
the head restraint in the rear seat backrest
the 2 M6 screws. Tighten.

Fig 2: Identifying Head Restraint Installation

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the cover.

Install:

the Velcro seams on the rear seat backrests
the 2 side pieces.

Fold up the head restraint.

Check the folding function of the head restraint by pressing the button on the dashboard when the ignition key is in position II.