Installing the whiplash unit on folding seats
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Install a new whiplash element.
Install:
- a new spring
- the locking washer.
Install:
- the shaft
- the bushings
- the lock nut. Tighten the M8 screw and the nut. See: Summary of tightening torques for specific components .
Slide the entire whiplash unit up towards the backrest frame.
Hook on the spring using 9512943 .
Reinstall the upholstery.
Install:
- the 4 X M10 screws for the backrest frame
- the cover
- the side panel.