Removing the power seat module (PSM)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Raise the seat to its highest position.

Fig 1: Identifying Ignition In Off Position

Courtesy of VOLVO CARS OF NORTH AMERICA.

Lift the seat out of the vehicle. See: Front seat, replacing .

Fig 2: Identifying Ignition Key Off

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the key. The key must be removed to ensure that the ignition is not switched on by mistake.

Wait one minute before starting work.

Remove the 2 screws.

Disconnect the connector.

Remove the control module.