Replacing plastic covering
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
The plastic cover is secured by clips at the top and bottom edges.
Remove:
Remove the warning triangle and inner panel.
Disconnect the connector.
Unscrew the pin in the center of the hatch.
Push the plastic covering to the right.
Install:
In reverse order.