Height adjustment
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Close the sun roof.
Remove the apron molding according to Apron molding .
Slacken off the screws for the glass cover according to Glass cover .
Front edge:
The upper section of the molding must be flush with or 1 mm under the roof panel (Dimension A).
Rear edge:
The upper section of the molding must be flush with or 1 mm above the roof panel (Dimension B).
Calibrate according to Sun roof module (SRM), calibrating .
Tighten the screws.