Adjusting sideways and front-rear

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Remove the headlining according to Headlining, replacing

Fig 1: Identifying Screws And Spacers For Gutter Frame

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the 8 screws.

There are two reference holes. One is round and the other is oval.

Lift up the sun roof.

Insert a drift that matches the diameter of the hole

Adjust the sunroof so that it is level at the sides and has even pressure at the front and rear edges.

Test the function of the sun roof by opening and closing it as far as it will go.

Calibrate according to Sun roof module (SRM), calibrating .