Hole making 3

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Edges To File

Courtesy of VOLVO CARS OF NORTH AMERICA.

NOTE:
It is vital to check using a position light that there are no gaps before filing up to the outline. If too much metal is removed, the door must be changed.
File the hole just enough so that the position light can be fitted easily, but not so much that any play is created.
File any sharp edges.