Handle inner, replace

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Inner Front Side Door Rivets

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove:

the door panel. See Panel front side door, replacing
the soundproofing. See Drip guard .
Only the sound proofing needs to be removed.

Drill out the 4 blind rivets.

Unhook the mechanical cable.

Remove the inner door opener.

NOTE:

The heat generated by drilling may melt the plastic.

Install:

In reverse order.

NOTE:

Always use new blind rivets, P/N 982565 .

NOTE:

When drilling out blind rivets: Vacuum up all filings and remnants in the door so that it will not cause noise later.