Making holes 2

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Hole Cut Inside Marked Area

Courtesy of VOLVO CARS OF NORTH AMERICA.

Use a little disc to cut a hole inside the marked area.
The hole making principle applies even though a rear door could be hidden.