Installing the ABS hydraulic modulator, continued

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Brake Pipes To Wheel Brakes From ABS Hydraulic Modulator

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the protective plugs. Connect the brake pipes to the ABS hydraulic modulator and the master cylinder. Tighten to 14 Nm .