Finishing work
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
No ABS, stability and traction control functions are available when there is communication with the Brake control module (BCM) (Volvo Diagnostics are activated). ABS warning lamp flashes for as long as the diagnostics are activated. To cancel the diagnostics before test driving the vehicle, the ignition must be switched off
Remove the pedal jack.
Bleed the brake system
See Brake system, bleeding (using bleeding unit) .
Wash off any spilled brake fluid. Use warm water and car shampoo.
Function test
See Function test .