LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 229 (Flywheel And Variable Valve Timing Unit - Checking/ Adjusting, Removal And Installation) >> Engine Mechanical >> Variable valve timing unit, checking and adjusting (B5XX4TX; 2002-) >> Installing and adjusting the variable valve timing unit/timing gear pulley on the camshaft >> Installing the crankshaft adjustment tool

Installing the crankshaft adjustment tool

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Starter Motor
GLL108757Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the mounting screws for the starter motor.

Pull out the starter motor and place it to one side.

Remove the blind cover plug from the hole for the adjustment tool.

Turn the crankshaft clockwise slightly.

Install: 9995451 . Ensure that the tool bottoms out against the cylinder block.

scientia non olet · About LEMON Manuals