Final check

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Checking Markings And Belt Tension

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove:

9995452 from the rear of the camshafts
9995451 . Install new plugs with new sealing washers. Tighten. See: Summary of specific components and tightening torques .

Checking the markings and belt tension.

Position the upper timing cover.

Turn the crankshaft 2 rotations. Check that the markings on the crankshaft and timing gear pulleys correspond.

Remove the upper timing cover.