Installing the timing belt

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Install the belt in the following order:

Fit the timing belt over the pulley on the crankshaft
the idler pulley
cam wheel, exhaust camshaft
water pump
belt tensioner.

Fig 1: Holding VVT Unit Fixed Position

Courtesy of VOLVO CARS OF NORTH AMERICA.

Turn the variable valve timing unit clockwise to the stop.

NOTE:

Hold the VVT unit fixed in the limit position clockwise when the belt if fitted.

Check that the markings on the belt pulley and the upper timing cover align.