LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 229 (Flywheel And Variable Valve Timing Unit - Checking/ Adjusting, Removal And Installation) >> Engine Mechanical >> Replacing the flywheel (B6284T) >> Pressure plate / clutch driven plate, replacing >> Removal >> Relieving the load from the clutch diaphragm spring

Relieving the load from the clutch diaphragm spring

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Clutch Diaphragm Spring
GLL109095Courtesy of VOLVO CARS OF NORTH AMERICA.
NOTE:

Do not allow the diaphragm spring to be under load for a long period of time. Relieve the load as soon as possible. Leave the compression tool in position.

Applies only to certain engine versions with self adjusting clutches: 

NOTE:

Keep fingers away from the three clutch rivets when relieving a load or removing the compression tool. There is a risk of clamping injuries.

scientia non olet · About LEMON Manuals