LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 229 (Flywheel And Variable Valve Timing Unit - Checking/ Adjusting, Removal And Installation) >> Engine Mechanical >> Replacing the flywheel (B5254T2) >> Pressure plate / clutch driven plate, replacing >> Installation >> Installing the clutch driven plate

Installing the clutch driven plate

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Clutch Driven Plate
GLL109096Courtesy of VOLVO CARS OF NORTH AMERICA.
CAUTION:

Turn the slightly longer part of the clutch driven plate hub in towards the flywheel. There is a marking on the clutch driven plate  .

Install the cone on the centering tool. Tighten the cone (by hand)  . Secure the clutch driven plate.

NOTE:

Tightening tools must not  be used on the cone or damage may be caused to the clutch driven plate.

scientia non olet · About LEMON Manuals