Transferring components

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Transfer

the SIPS member with the exhaust system mountings
the heated oxygen sensors (HO2S).
NOTE:
The front and rear heated oxygen sensors (HO2S) are not interchangeable.

Tighten the heated oxygen sensors (HO2S) to 45 Nm . Use tool 9995543 .