LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 216 (Camshaft Seal And Variable Valve Timing Unit - Removal And Installation) >> Engine Mechanical >> Camshaft seal/variable valve timing (VVT) unit, replacing >> Camshaft seal/variable valve timing (VVT) unit, replacing (B5xx4T -2001) >> Removal and Installation >> Replacing the rear camshaft seal

Replacing the rear camshaft seal

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Special Tool Extractor 999 5919
GLL102728Courtesy of VOLVO CARS OF NORTH AMERICA.

Carefully pull out the old seal. Use extractor 9995919 .

Lubricate the new seal using Volvo quality engine oil. Install the seal on the exhaust camshaft. Use drift 9995450 .

NOTE:

The seal is normally pressed in so that it is level with the internal bevelled edge. If the shaft journal is showing signs of wear, the seal can be pressed in 2 mm deeper by turning the drift socket.

scientia non olet · About LEMON Manuals