Installing components

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Install:

the nuts for the cover in the wing liner.
the right front wheel

Fig 1: Identifying Engine Compartment Components

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install:

the trigger wheel. Tighten the screw
the camshaft position (CMP) sensor housing. Tighten the screws
the engine stabilizer brace on the cylinder head
the cover over the ignition coils
the charge air pipe over the engine.

Remove:

the air cleaner (ACL) cover and the intake air hose
the solenoid valves on the air cleaner (ACL) cover
the engine stabilizer brace. Tighten the screws
the screw holding the engine stabilizer brace to the bracket on the engine. Tighten.

Check the engine compartment. Wipe the engine compartment clean.