Safety Precautions
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Always cut the current to the headlamps before beginning work.
Do not touch the high and low beam stalk during work due to the high voltage and risk of explosion. Remove the keys and lock the car.
Allow the lamp to cool. Always use protective goggles and gloves when working on the lamp.
The glass body of the Bi-Xenon-lamp is filled with different gases and metal vapors which are under pressure. Never touch the glass body of the lamp.
Only touch the lamp at the socket. The lamp must only be used in enclosed headlamps.